1. Take the ring strap apart from the buckle so that it can be spread flat on the table. In order to facilitate the next action. It's better to put a piece of flannel under it to protect the watch.
2. After spreading the strap flat, use a pointed tool, such as the thimble of the adjusting strap tool (this time using a small scissors), to find the position of the bolt along the arrow on the back of the strap, press against the small round protrusion, and move outward in the direction of the arrow.
3. After the bolt is removed, the watch strap can be disassembled by gently screwing along the notch of the joint.
4. To remove a watch strap, it is necessary to remove the two adjacent pins.
5. Remove the appropriate length of the strap, you can put the strap back. The bolt may be a little tight. Find something with moderate hardness (I'm holding a plastic lighter) and tap it a few times, or push it hard, and you can put it back. Remember to put the button on.
