Editing process of wax coating
Clean the vamp → wipe burnt wax → wipe Brazil wax → spray wax water → polish
1. Clean the vamp (remove the mercury pen and glue wire from vamp with raw film.)
2. Burn wax (according to the color of leather and the style of shoes, the general burning effect is that the head and tail should be slightly heavy, with layers and three-dimensional feeling. The rotation speed of the chafing machine is about 1000-1500 revolutions, and the average burning wax is once for every 3 pairs of shoes. Remarks: the motor power of the chafing machine is different, and the rotation speed can be adjusted appropriately. Enter the double bottom oven, and the oven temperature is about 60 degrees)
3. Wipe Brazil wax (according to the color of leather and shoe type, the general effect is that the head and tail should be slightly heavy, with layers and three-dimensional feeling. The rotation speed of the machine is about 350-500 revolutions, and the last Brazil wax is needed for every 3 pairs of shoes. Remarks: the motor power of the machine is different, so you can adjust the rotation speed appropriately.)
4. Spray wax water and wax oil (spray the effect according to the style of shoes, the head and tail of gentleman shoes should be slightly bright, and the whole body of casual shoes should be sprayed.)
5. Polishing (polishing layer, wax feeling, oil feeling and burning feeling)
